How to bleach the soles of sneakers?

Sneakers with white soles look nice and stylish. The problem is that after several exits to the street, they lose their original color. A dirty shade gives the impression that the owner of the sneaker is a sloppy and sloppy person. To always maintain a presentable appearance of your shoes, you need to properly care for them. There are many ways to whiten the sole of a sneaker, from which everyone can choose the most suitable one.

Before you start bleaching the soles of your sneakers, you need to prepare them. First of all, you need to wash your shoes from dirt and dust. This can be done under running water using a brush or sponge. Laces and insoles need to be removed and washed using detergents. If the degree of contamination is significant, it is recommended to pre-soak in bleach or powder.

Shoes can be washed manually or in an automatic machine. The first option is more laborious, but less dangerous for the condition of the sneakers. Machine wash is only suitable for high quality shoes, otherwise the material may be damaged and the sole will come off. The water temperature in both cases should be no more than 40 degrees. It is necessary to dry shoes near heating appliances, but without direct contact. It is easier to clean white soles on sneakers if they have been well washed beforehand.

Sole whitening methods

Sneakers with white soles are beautiful shoes that highlight the unique style of clothing. But their regular wear is accompanied by problems associated with rapid pollution. When the appearance of the shoes deteriorates, people begin to look for ways than to wash the sneakers in order to return the original color. There are many ways to clean a dirty surface at home and if one of them is ineffective, you can always use the other. It is really not difficult to whiten a yellowed sole, you just need to choose the right product.

Lemon acid

Citric acid helps to whiten the white sole. Before cleaning, the rubber surfaces of the shoes must be moistened with water. Put a small amount of citric acid on the sole, rub with a sponge and leave for 10-15 minutes. Then rinse the shoes with running water. Citric acid is suitable for cleaning rubber material that has changed color due to dirt or age. It will not be possible to cope with the yellowness formed as a result of drying on a hot battery.

Vinegar

Among the methods available for cleaning sneakers, a vinegar solution can be distinguished. Shoes must be washed beforehand to remove dirt. To clean the white soles, the vinegar must be diluted with water in a ratio of 1: 3.

It is better to use a cloth for washing, as the sponge will absorb the product strongly. The cleaning process is simple and consists of wiping the soles with a cloth soaked in vinegar solution. A brush can be used in heavily soiled areas. After cleaning, the sole needs to be rinsed with water.

Nail polish remover

A good effect is noted after cleaning the sole with a nail polish remover containing acetone. To restore the white color, you need to moisten a cotton pad or soft rag with the product and wipe the sneakers. Care must be taken when cleaning so that nail polish remover does not get onto the fabric. Then the surface must be rinsed with water and dried.

Toothpaste or tooth powder

To cope with the yellowness and gray tint on a white sole, toothpaste or tooth powder helps. The shoes must first be moistened for active foam formation. To get the sneakers back to their original color, you need to apply a paste or powder to the brush and clean the surface. Then rinse with clean water to remove any residual detergent and dry.

Laundry soap

It has long been known that laundry soap is one of the best anti-pollution agents. The way to use it is simple. You need to take a rag or brush and apply soap to it. Then wash the surface with a product and rinse under running water. Laundry soap cleans well not only the sole, but also any other materials from which sneakers are made.

Washing powder

A common method used to bleach soles is with laundry detergent. To restore the color of the sneaker, a deep basin is required in which the shoes are soaked. To make a soapy solution, you need to take a handful of cleaning powder and dilute it in warm water. Soak your shoes so that the sole is completely covered. After 30 minutes, take out the sneakers and brush with a brush. The soaking method is applicable only to those shoes that are of good quality, otherwise the sole may come off from high humidity.

Soda

Many housewives use baking soda to get rid of impurities. The remedy is safe and usually available in every home. To whiten the sole of a sneaker, sprinkle baking soda on a sponge or cloth and scrub the soiled surface until desired. Then rinse under running water. To enhance the effect, soda can be mixed with lemon juice and similar steps can be taken.

For sneakers to retain their color for a long time, you need to follow simple care guidelines. The following rules help to maintain the original appearance of the shoes, which must be adhered to:

• keep sneakers away from sunlight;
• wipe the surface from dust and dirt after each going outside;
• dry near heating appliances, but without direct contact;
• periodically treat sneakers with a water-repellent gel;
• do not leave shoes wet without drying.

The main thing that will extend the service life is accuracy when worn. It is necessary, if possible, to bypass puddles and mud, which negatively affect the sole and material of the shoe.

Often times, people refuse to wear sneakers with white soles because their socks are difficult to clean. Taking care of such shoes is, of course, more difficult, but quite realistic. To prolong the life and maintain its original appearance, you need to pay special attention to washing and cleaning. If it was not possible to avoid darkening or yellowness, then you need to use bleaches or folk remedies that will help restore the white color.