How to clean a gold chain at home: the easiest and most effective ways

Gold is a very beautiful metal, especially in the form of chains or bracelets. Original weaves make the jewelry sophisticated and unusual. However, over time, the products begin to fade or become overgrown with a layer of fine dirt particles. In this case, jewelry workshops are not always an option, so the question of how to clean a gold chain at home becomes relevant.

By scientific definition, gold is the metal that least needs to be cared for. It is not influenced by external factors, since its reaction with stimuli is minimal. That is why the noble substance does not corrode and continues to shine even several years after it has become part of the jewelry.

But over time, even gold chains can darken and become dull. One of the reasons for this unpleasant phenomenon is the presence of impurities in alloys. However, this does not always happen for the above reason. The factor influencing the color change of the metal can be the interaction of the latter with the human skin, which is covered with a layer of dust. That is why cleaning gold items is extremely necessary.

Cleaning a chain is not always easy. This is due to the large number of links and weaves that make up the decoration. But there are many ways by which you can easily return the original look of your favorite jewelry.

Despite the stable physical characteristics, the mechanical action of other substances can affect the precious metal as well.

Therefore, you need to clean the chain, observing the following recommendations:

• in order to avoid scratches on the surface of the decoration, the toothbrush used in the work can be wrapped with a layer of cotton wool;
• it is better to cover the container that is used to clean the product with a soft flannel cloth;
• use only soft-bristled brushes to remove dirt;
• all crystalline substances that will be involved in the process must be thoroughly dissolved in water before starting work.

These two components helped out more than one mistress in different situations. They are also indispensable for cleaning gold items. Affordable, found in every home, these two products will not only remove visible dirt, but also restore precious shine to the product. How can you clean gold with them?

Salt

Its positive impact on gold was discovered several decades ago.

Even after such an amount of time, this method does not lose its popularity. For work, you need warm water and table salt. The procedure itself includes the following steps:

• Dissolve three tablespoons of salt in 0.5 cups of water.
• Dip the decorations that need to be cleaned into a container with a solution.
• Soak for 12 hours.
• Rinse and dry after the specified time.

Soda

This method also includes the use of foil baking paper. You will need baking soda, water and a sheet of foil. Application:

• Pour water into a glass or cup (approximately ½-1/3 of the total volume of the dish).
• Dissolve 2 tablespoons of soda in a liquid.
• Arrange the foil in an even layer in a saucepan or bowl.
• Place decorations on the foil surface.
• Fill with a prepared solution.
• Leave on for 12 hours.
• Rinse and dry.

All visible contamination, even the most persistent, will disappear from the use of such methods.

Quite a simple, but no less effective way, with which you can clean the "jewelry" and return it to its natural shine.

This method requires only two ingredients: warm water and dish and saucepan detergent.

Cleaning process:

• Dissolve a teaspoon of dishwashing liquid in one glass of water.
• Pour the resulting liquid into a medium-depth metal container.
• Line the bottom with flannel cloth or foil paper.
• Lay out jewelry on the surface of the covered bottom.
• Put a thicket with products on low heat.
• Boil for 10-15 minutes.
• Rinse jewelry in cold water and dry.

Alcohol and washing powder

Of the necessary components you will need: water, washing powder and ammonia in the following quantities: water - one glass; alcohol - one teaspoon; powder - one tablespoon.

This cleaning method will wash away even stubborn dirt. He is able to cope with the problems that the first three methods did not solve. Application:

• Boil the water well.
• Pour it into a deep bowl or plate.
• Add powder and the indicated amount of ammonia.
• Stir so that no crystals remain from the powder.
• Wait a while until the boiling water turns cold.
• Dip the product into the prepared solution.
• Wait for two to three hours.
• Rinse and rinse jewelry.

Onions and potatoes are the safest remedies

This method is not as popular as the ones listed above, but it does not become less effective from this. To peel this method, you need to peel one onion and one potato.

Grate vegetables on the finest grater. Pour the gruel into a bowl or glass. Load this fraction with gold jewelry and leave to "soak" for 2-3 hours. Then rinse the product well in warm water and dry it from excess moisture.

If a paste-like substance is used, then it can be immediately applied to the brush and gently wipe all the links of the jewelry with the latter.

Tooth powder must first be turned into gruel with water. Then brush the links of the gold piece with a brush as well. To maximize the effect, you need to leave the gold in powder or paste for a couple of hours. Then rinse well with warm water.

In order for gold jewelry to please for a long time with its brilliance and beauty, you should not neglect the simple rules of caring for it, the most important of which is cleaning from dust and other contaminants.