How to wash polyurethane foam from your hands at home

Nowadays, when carrying out repair and construction work, polyurethane foam is popular.

It is an aerosol sealant that has been used successfully to fill large cracks and cavities. With its help, they provide heat and sound insulation and are used to fasten building parts.

This cheap and necessary tool appeared not so long ago; previously, cement was used instead. But now, thanks to its versatility and ease of use, polyurethane foam has become an indispensable thing in many types of work related to repair or construction.

However, even a professional in this area is not immune from the fact that the assembly staff will not stain clothes and exposed areas of the body when performing work. The hands are primarily at risk, since this part of the body is in direct contact with the sealant. For this reason, it is important to know how and with what to wash the polyurethane foam from your hands.

How to wash polyurethane foam from your hands at home

It is best to try to immediately remove the foam after hitting it, when it has not yet dried. Do not smear under any circumstances, but carefully remove with a napkin. If you rub the lather on your hands, it will be much more difficult to remove it.

In case of contact with the skin, in no case should the foam be smeared, but carefully remove it with a napkin.

There are several effective ways to clean your hands from polyurethane foam at home. You can stock up on a special tool in advance or use what is in every home. Choose a non-corrosive formulation that is most suitable for the skin, and wash off the dirt gently.

Special solvent

The best way to solve the problem is to use a special dissolving agent (preferably one company with a sealant).

You need to rub the soiled place with a napkin soaked in liquid, and after cleansing, wash your hands with soap.

Nail polish remover

Acenton is a good solvent, so nail polish remover is suitable for removing foam from skin.

To remove the polyurethane foam from the skin of your hands, a varnish remover will help. In most cases, it contains acetone, which is a strong solvent.

It is important to remember that acetone has a strong unpleasant odor, therefore, if possible, carry out the treatment in the air or with open windows in the room so that the respiratory organs are not affected.

Kerosene

After removing the foam, moisturize your hands with a nourishing cream.

The use of kerosene is considered an equally effective way. If you gently clean your hands, wiping the composition with a swab soaked in liquid, you will not damage your skin.

Do not forget that after interacting with solvents, your skin will need gentle care. After cleansing, be sure to lubricate your hands with a nourishing or moisturizer.

The listed methods are quite effective, but unsafe for those with increased skin sensitivity. How to wipe off the polyurethane foam if you cannot use solvents? In these cases, you should resort to the help of gentle means.

How to wash the foam off your hands

If your skin is too sensitive, or you are prone to allergic reactions to strong chemicals, you can use the methods below.

Laundry or toilet soap

The easiest way to wash your hands of polyurethane foam is to use laundry or toilet soap. Immerse your hands in a basin of warm water for 4–5 minutes, then lather your skin generously and rub the stained area with a washcloth.

You should not make a lot of effort and wipe off the dried building composition, peeling off the skin. Proceed with caution and the composition will rinse off completely.

Vegetable oil

After applying the oil to the skin, rub the place of contamination with baking soda or washing powder.

You can wash the skin of your hands from polyurethane foam using vegetable oil. To do this, you need to warm it up to room temperature and apply it to the stained areas of the skin.

After 5-7 minutes, sprinkle laundry detergent or baking soda on your hands and scrub well with a washcloth. Then wash your hands (preferably running water) and brush with a nourishing cream.

Salt

• Table salt is a good helper in removing this compound from your hands. You need to pour it on the contaminated area of ​​the skin, gently rub and wash your hands with detergent or soap.
• Another way is to dissolve table salt in warm water, immerse your hands in the liquid for 5-10 minutes, and then scrub the skin with a pumice stone or sponge.

These simple remedies will help get rid of foam marks on your hands without damaging your skin or causing irritation.

How to wash foam off your hands if it is dry

The protruding part of the dried foam must first be cut off with a knife or file.

If polyurethane foam gets on your hands and you could not get rid of it in time, it will harden very quickly. Now it will be problematic to remove it, it will require more effort and time than cleansing the skin of fresh composition. So how to remove polyurethane foam from your hands if it is dry?

If the polyurethane foam fell on your hands in large quantities and has already hardened, it is impossible to remove it the first time, but it is really possible to remove the main part of the composition.

Carefully cut off the protruding part with a knife or other sharp object, try not to touch the skin. It is better not to touch the remaining "islands" of foam on your hands, as you risk getting hurt. After a while, the remaining foam will fall away from your hands by itself, you should not make a lot of efforts to eliminate traces of the sealant immediately, otherwise you can remove them along with the skin.

Foam residues can be gradually removed with soap and a brush.

To speed up the process of cleansing dried foam from your hands, try the following:

• Lubricate your soiled hands with any cosmetic cream. If you don't have a cream, use petroleum jelly or another greasy product.
• Lather generously with a hard washcloth or brush.
• Try to gently peel off the assembly sealant from your hands without damaging your skin.

To facilitate the cleansing process, you can steam your hands in hot water for 3-5 minutes before washing.

Gloves must be used when working with polyurethane foam.

Now you know how to remove polyurethane foam from your hands. Please be aware that some products are not designed to interact with the skin and may cause irritation or allergies. Excessive diligence in cleaning your hands will damage the skin, so it is best not to use force when cleaning.

In the process, try to protect your hands from dirt as much as possible, use gloves, and you can avoid such unpleasant procedures as cleansing polyurethane foam from the skin of your hands.